Full uniclass spec done
in 3 days.

Starting at £100. 100% Money-back guarantee.

qw

vc

mshm

Specs from £100. Ready in 3 days.

Avoice generates a full Uniclass specification from your drawings: Reviewed, cross-referenced, and ready to issue.

Ss_25_10_30
        

Internal walls — blockwork

Ss_25_10_30 /1.0 Products

1. Concrete blocks: Aggregate concrete blocks to BS EN 771-3, minimum compressive strength 7.3 N/mm². 85%

2. Block density and thickness: ✓ COMPLETE 90%

2.1 Dense concrete, minimum 1900 kg/m³ for walls requiring fire resistance.

2.2 Lightweight aggregate, maximum 1400 kg/m³ elsewhere.

2.3 Thickness: 100mm non-fire-rated, 140mm fire-rated. Refer to drawings for wall type schedule.

3. Movement joints: compressible filler board, 13mm wide, with sealant to match. ○ SEALANT NOT SPECIFIED 55%

4. Fire resistance requirements not yet specified. § AWAITING FIRE STRATEGY 0%

72% complete
4 gaps · 2 critical

View all issues →

Every conflict. Found automatically.

Avoice reads your drawings, scans your schedules, and flags every conflict, mismatch, and missing detail across your specification — before it reaches the contractor.

Cross-reference check

Spec vs Drawings vs Schedules

4 issues found

CONFLICT Block thickness — spec vs drawing ▶

SPECSs_25_10_30 /100

140mm to fire-rated walls

140mm

DRAWINGA-201 Rev P03

Wall W04 (corridor): shown as 100mm

100mm

Wall thickness · Detected today

CONFLICT Door schedule contradicts fire strategy ▶

SCHEDULEDoor Sched Rev B

D-14 to D-22 corridor doors: FD30

FD30

FIRE STRATEGYRev D §5.1.3

All corridor doors: FD60S + smoke seals

FD60S

Fire doors · Detected today

MISMATCH DTM decision not reflected in spec or drawings ▶

SPEC + DWGSs_25_10_60

Insulation: 100mm PIR board

100mm

DTM #1427 Mar

Increased to 120mm for Part L

120mm

Insulation · 2 days ago

MISSING No drawing for blockwork-to-curtain wall junction ▶

SPECSs_25_10_30

DPC where blockwork abuts external walls

Required

DRAWINGNone found

No junction detail — site issue at grid 4

Missing

Junction detail · 3 days ago

Specs built from your project, not a template.

GA plans, consultant reports, employer's requirements, door schedules — Avoice ingests your project documents and generates a coordinated Uniclass specification. Every clause grounded in your drawings. Every cross-reference checked.

↑

Drop project documents

PDF, DWG, XLS, IFC

DWG

GA_Plans_A100-A110_RevP03.dwg

12.4 MB

✓

PDF

Fire_Strategy_RevD_HoareLea.pdf

2.4 MB

✓

PDF

Acoustic_Report_BB93_SandyBrown.pdf

1.8 MB

✓

XLS

Door_Schedule_RevB.xlsx

320 KB

✓

PDF

Employers_Requirements_DfE.pdf

4.1 MB

✓

DWG

Structural_GA_S201-S204.dwg

8.6 MB

✓

Every conflict. Found automatically.

Avoice reads your drawings, scans your schedules, and flags every conflict, mismatch, and missing detail across your specification — before it reaches the contractor.

Cross-reference check

Spec vs Drawings vs Schedules

4 issues found

CONFLICT Block thickness — spec vs drawing ▶

SPECSs_25_10_30 /100

140mm to fire-rated walls

140mm

DRAWINGA-201 Rev P03

Wall W04 (corridor): shown as 100mm

100mm

Wall thickness · Detected today

CONFLICT Door schedule contradicts fire strategy ▶

SCHEDULEDoor Sched Rev B

D-14 to D-22 corridor doors: FD30

FD30

FIRE STRATEGYRev D §5.1.3

All corridor doors: FD60S + smoke seals

FD60S

Fire doors · Detected today

MISMATCH DTM decision not reflected in spec or drawings ▶

SPEC + DWGSs_25_10_60

Insulation: 100mm PIR board

100mm

DTM #1427 Mar

Increased to 120mm for Part L

120mm

Insulation · 2 days ago

MISSING No drawing for blockwork-to-curtain wall junction ▶

SPECSs_25_10_30

DPC where blockwork abuts external walls

Required

DRAWINGNone found

No junction detail — site issue at grid 4

Missing

Junction detail · 3 days ago

Production-ready specs without the enterprise bill.

No software should have a monopoly on spec writing. We're here to make it fast, accurate, and accessible to every firm.

Thank you! Your submission has been received!

Oops! Something went wrong while submitting the form.

z

i

z

From workload to workflow

Try the AI workspace built for architecture.

Book a demo

Full uniclass spec done in 3 days.

Starting at £100. 100% Money-back guarantee.

Cross-reference check

Cross-reference check

Full uniclass spec done
in 3 days.