b

Quality control

Every document reviewed before it goes out the door

Specs, drawings, reports, proposals. Everything your firm produces is checked for errors, inconsistencies, and missing information automatically.

s

g

u

z

d

g

s

r

Define your own QC rules and checklists. Upload a code or brief, and Avoice generates criteria automatically.

Build custom checklists from any source. Upload a fire strategy, a planning condition, or your own QA template.

AI reads the document and extracts checkable criteria. No manual entry required.

Reuse criteria across projects. Build once, apply everywhere, update anytime.

This is some text inside of a div block.

Custom Criteria

Extracting

PDF

Approved Document B Vol 2

Fire safety · 156 clauses extracted

Generated criteria

Escape route max travel distance ≤ 18m

Table 2.1 · Single direction

Compartment wall to achieve 60 min rating

Clause 7.2 · Residential above 5m

Cavity barriers at every compartment line

Clause 9.1 · Concealed spaces

Upload a drawing set. AI flags issues on every sheet and catches conflicts across them.

Flags code violations, missing annotations, and dimension errors.

Check against Building Regs, fire strategy, accessibility, or any custom criteria you define

Issues pinned directly on the drawing with clear descriptions. Review sheet by sheet or export a full report.

Upload every document on your project. AI reads them all and flags where one contradicts another.

Fire report says one thing, the drawing says another. Avoice catches it before the contractor does.

Cross-checks across every file type. PDFs, drawings, models, schedules, emails, consultant reports.

Every conflict shows both sources side by side. Fix it in minutes, not after weeks of coordination meetings.

This is some text inside of a div block.

Coordination Check

Comparing

SPEC

Specification

28 sections

DWG

Drawings

54 sheets

Conflicts found

Wall type W3 spec says 150mm block, drawing shows 100mm

Clause /2.4 A-301

Spec references door D-018 but not on any drawing

Clause /4.6 Missing

Floor finish F07 on drawing not listed in finish schedule

A-102 Not found

z

i

z

From workload to workflow

Try the AI workspace built for architecture.

Book a demo